Bilge Pumps For Boats

Marine Equipment, Accessories and Spares

Back	Leisure Range
	Marine Equipment

Bilge Pumps

Bilge Pump Manual Compact 50

Low profile under deck bilge pump
Tough proven whale design
Completely enclosed protected diaphragm
49ltrs (13 US gals) per minute
Only 4 3/4" (119mm)deep for low profile installation under deck or thru
Bulkhead where space is limited
Rotatable inlet & outlet nozzles for flexibility
Easily removable clamp ring for quick maintenance
Quick & easy to fit
Supplied complete with deck plate
Also Suitable for pumping diesel
Max lift:3m (10ft) max head:4m (13ft) weight:0.9kg (2lb) hose bore:25mm (1")

Ref:012060
Price £63.99

Whale Orca1300 24V Electric Bilge Pump

1300 GPH 24V Electric Bilge Pump.
Fully compliant with ISO 8849 Marine standard.
Easy to install with multiple wire locations and compact design.
Easily positioned in the most convenient part of the bilge.
Large filter base ensure maximum surface area is exposed to bilge wate
Low amp draw means long life battery.
Easy access tab to release cover and allow access to the motor.
Robust ABS fuel-resistant housing

Ref:012006
Price £40.99

Shurflo Extreme Smart Pump

A new range of intelligent, micro-controller based, variable speed pumps that deliver high performance flow rates in excess of 5.5GPM (20L per minute), in silence and at a pressure of up to 65PSI (4.5bar)
High flow
(over 20L per minute)
Variable speed pump controlled by Smart Sensor
High pressure switch needed
Silent operation at any flow/pressure condition
No rapid cycling
Seamless heat electro- coated motor shell
5 chamber design
Large inlet and outlet valve passages
Automatic voltage protection
Current limiting at 10Amps maximum

Ref:044294
Price £200.99

Gulper 320 - BP2052 -12v Bilge Pump

Applications
• High capacity for fast drainage in grey waste systems
• Remote mounting bilge pump meets ISO15083
Gulper Benefits
• Runs dry
• Pumps air and water mixture
• Non-choke valves
• A decade of reliability and debris handling
New Features
• High capacity 20 litres (5.3 US gals) for fast drainage
• New barbed connections - instantly ready for connection with 3/4" (19mm) or 1" ports (25mm)
• Easier installation: Three foot design is ideal for fitting on uneven surfaces
New sealing strap around pump body ensures the pump remains in position
Ezi-clamp locking ring (Patent pending) simply twist and screw to lock head in desired position
Models
12v

Ref:012044
Price £144.99

Whale Electric Field Sensor Switch

This high quality electric bilge pump range consists of 4 models with a choice of 3 flow capacities - 500, 950 and 1300 GPH.
ocations and compact design so that it may be positioned in the most convenient part of the bilge. The Orca's large filter base
ensure maximum surface area is exposed to bilge water, while low amp draw means long life battery. Easy to maintain by
depressing tabs to release cover and pull up for access to the motor. Robust ABS fuel-resistant housing.
Orca bilge Pumps are compatible with:Whale Electric Field Sensor Technol

Ref:012061
Price £31.99

Rule Mate 500 Bilge Pump

GPH - Open Flow: 500
GPH - 3.35'
GPH 6.7'
Motor: 12V
Amp Draw: 2.5A
Fuse Size: 2.5A
Discharge: 19mm
Height: 100mm (4")
Width: 125mm (5")
Depth: 82mm (2 3/16")
Weight: 1lb
The Rule-mate consists of a powerful rule bilge pump and a new non-mercury float switch in a single housing.
Fully automatic but will only turn on when the water level rises. There is no cycling and no battery drain.
The pump remains off until the internal float switch rises and the pump stays on until the water is evacuated.
The pump's internal computer senses no load (water) against the impeller and then shuts off.
A detachable strainer provides easy access to the impeller area for removal of debris.
Each pump is easily installed with the pump and switch internally wired.
A third wire allows the pump to be connected to a manual switch if so desired.

Ref:049485
Price £54.99

Rule Mate 750 Bilge Pump

GPH - Open Flow: 750
Height: 100mm (4")
Width: 125mm (5")
Depth: 82mm (2 3/16")
Weight: 1lb 5oz
The Rule-mate consists of a powerful rule bilge pump and a new non-mercury
float switch in a single housing.
Fully automatic but will only turn on when the water level rises.
There is no cycling and no battery drain.
The pump remains off until the internal float switch rises and the pump syas
on until the water is evacuated. The pumps' internal computer senses no load
(water) against the impeller and then shuts off. A detachable strainer
provides easy access to the impeller area for removal of debris.

Ref: 049490
Price £68.99

Rule Mate 1100 Bilge Pump

GPH - Open Flow: 1000
Height: 100mm (4")
Width: 125mm (5")
Depth: 82mm (2 3/16")
Weight: 1lb 8oz
The Rule-mate consists of a powerful rule bilge pump and a new non-mercury
float switch in a single housing.
Fully automatic but will only turn on when the water level rises.
There is no cycling and no battery drain.
The pump remains off until the internal float switch rises and the pump syas
on until the water is evacuated. The pumps' internal computer senses no load
(water) against the impeller and then shuts off. A detachable strainer
provides easy access to the impeller area for removal of debris.

Ref:049495
Price £90.99

Rule 360 GPH Bilge Pump

This pump is designed for the smaller boat, pumps 360 gallons per hour. Totally submersible and ignition protected, to all existing safety standards BIA, NMMA and ISO/EC regulations.
Water cooled motors for long life, with anti airlock design and exclusive.
Rule moisture tight seals.
Snap-lock strainer base for easy installation and removal, and silent vibration free running.
No burn out if run dry.
Stainless Steel shaft.
Height: 89mm (3 1/2")
Weight: 225 grms
Width: 60mm (2 3/8")
Hose Diameter: 19mm (3/4")
Current: 2.1A

Can be converted to side and transom with mount 049506

Ref:049505
Price £17.99

Back

Contact